Century Heating FW3500 Wood Stove

Buy Century Heating FW3500 Wood Stove Online

Century Heating FW3500 Wood Stove

Specifications

Fuel type
Dry cordwood

Recommended heating area(3)
1,000 – 2,700 ft²

Overall firebox volume
3.5 ft³

EPA loading volume
2.84 ft³

Maximum burn time(3)
10 h

Maximum heat output-dry cordwood(4)
110,000 BTU/h (32.2 kW)

Minimum overall heat output rate(4) (5)
18,200 BTU/h (5.3 kW)

Maximum overall heat output rate(4) (5)
49,500 BTU/h (14.5 kW)

Average overall efficiency-dry cordwood (HHV)(5) (6)
71%

Average overall efficiency-dry cordwood (LHV)(5) (7)
76%

Optimum efficiency(8) (9)
77%

Optimum heat transfer efficiency(11)
76%

Average particulate emission rate(1)
1.32 g/h

Average CO(10)
92 g/h

Alcove installation approved
Yes

Mobile home approved
Yes, with fresh air intake

Premium quality blower included (CFM)
Optional

Certified according to applicable standards
CAN/USA accredited laboratory

Combustion technology
Non-catalytic

Stainless-steel secondary-air system
Yes

Flue outlet diameter
6″

Chimney diameter
6″

Type of chimney

CAN/ULC S629, UL 103 HT (2100 °F)

Minimum chimney height
12″

Overall dimension (Width)
28 1/8″

Overall dimension (Depth)
31 1/4″

Overall dimension (Height)
35 3/4″

Door type
Single, glass with cast iron frame

Door opening size (Width)9
19″

Door opening size (Height)
9 7/8″

Glass type
Ceramic glass

Glass surface – W x H
16 5/8″ x 11 3/4″

Firebox size (Width)
22 7/8″

Firebox size (Height)
12 7/8″

Firebox size (Depth)
20 1/8″

Maximum log length
22″ (16″ recommended)

Log positioning

Loading over width and over depth

Baffle type
High quality vermiculite

High-efficiency certified appliance
Yes

Canadian Standard (emissions)
CSA B415.1-10

USA Standard (emissions)
EPA

Canadian Standard (safety)
ULC S627

USA Standard (safety)
UL 1482, UL 737

Steel thickness-body
3/16″

Steel thickness-top
5/16″

Warranty
Limited 5 years

Shipping weight
451 lb (205 kg)

Clearance To Combustibles

Country
Canada
United States

Size
Single wall pipe
Double wall pipe
Single wall pipe

Double wall pipe

Clearance – Back wall
13 3/4″
8″
13 3/4″
8″

Clearance – Side wall
22″
19″
22″
19″

Clearance – Corner
12″
12″
12″
12″

Clearance – Base of the unit to ceiling**
84″
84″
84″
84″

The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner’s manual, catalogues, flyers, magazines and/or web sites).

**Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
Optimum overall efficiency at a specific burn rate (LHV).
This appliance is officially tested and certified by an independent agency.
The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
As measured per CSA B415.1-10 stack loss method.
Higher Heating Value of the fuel.
Lower Heating Value of the fuel.
The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
Recommended heating area and maximum burn time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.